Contact

Personal · Science

Skynet

A plug-and-play satellite-tracking application that brings pass planning, rotor control and Doppler-corrected radio operation into one simple interface, built to streamline the operator's workflow. Download Skynet.

After Mission Sophie, I wanted my own satellite-tracking application — one that other radio amateurs could pick up quickly. During the ISS contact, the operators juggled a tracking program, a rotor controller and a radio, each with its own window, settings and failure modes. Skynet grew out of that: one place to plan a pass, point the antenna and keep the radio on frequency.

Plug-and-play design

Efficiency in software doesn't come from operation alone, but also from integration. A slick UI is cool, but it only goes so far if the team has to pull their hair out installing and configuring the tool.

So I drew the homepage design from NASA's mission control room. The centre of the page is dedicated to the map, the most mission-critical piece for planning. Around it sit the supplemental data and simply labelled buttons, so people can find their way around even without a manual. The homepage is the hardest page to design: it links to so much information, and it is very easy to overcomplicate it or end up with one dropdown menu holding more entries than the page can fit.

Skynet ships with built-in Hamlib support, so it should, “Hypothetically”, be able to connect automatically to devices using most of the supported protocols. Operators who want to get more hacky with it can still bypass the automatic setup.

For obvious reasons I couldn't test every device, so validation on that side is ongoing. This is where I would like to thank my friend Lucien, F1TE, for helping me test the software: without his feedback I would not have reached a shippable version so quickly.

One screen for the whole pass

I wanted operators to be able to manage both the radios and the rotor from a single monitor. Every important piece of information about the system's status must be visible at a glance, with clear fault indicators and clear instructions on which component is misbehaving and how to recover. From the polar view, the user sees the predicted trajectory, the direction of the antennas, the position of the tracked satellite, and the azimuth and elevation of any point under the mouse.

It was also important to let operators customise their work environment, which is why radio and rotor control are clearly separated, and their views can be arranged to suit the use case.

The software is fully automatable: with Auto Track, the antennas preposition themselves at the AOS point five minutes before a pass, over and over again. If requested, the operator can also program a park position that the antennas return to five minutes after LOS, before waking up for the next pass.

Documents & links

Let’s build
something together.

[email protected]