Contact

Personal · Science

NOAA QFH

Building a QFH antenna to receive NOAA weather images, then revisiting the project for a radio symposium in Bordeaux.

Building the QFH antenna

I wanted to understand how satellites worked and how I could receive their signals myself. At the time, some NOAA satellites were transmitting APT weather images over VHF, which gave me a concrete project to try.

I found a published QFH antenna design and built my own: two crossed helical loops that give the circularly polarised, wide-coverage pattern weather satellites need, so a fixed antenna can follow a whole pass without a rotor. Once built, it went up on the roof.

Signal, software and first images

After the antenna was built I still needed to process its signal. So, equipped with my new SDR module and trustworthy computer, I went straight to Reddit. I used a publicly available program called Gpredict to drive my SDR module and compute the Doppler offset from the satellites.

Then, with some Hamlib scripts and WXtoImg, I was able to fetch the received signal from the SDR's software, pipe it into the image decoding tool and get some pretty nice results. I was very surprised, on only the second satellite pass I recorded, to be able to forecast precipitation over the Alps all the way from my house!

Symposium universitaire Radio amateur

Years later, after starting the electronics programme in Bordeaux, I was invited to present a project at the Symposium universitaire Radio amateur. I chose this weather-satellite receiving station.

Preparing the talk gave me a reason to revisit the project, study the theory in more depth, and follow the complete chain from the satellite transmission to the final image — from the AVHRR sensor's light intensity, through amplitude and frequency modulation, down to demodulation, decoding and the picture on screen. The slides are available below.

Documents & links

Let’s build
something together.

[email protected]